Long Life Cardio - Max Pulse

Max Pulse Device for Cardiovascular Screening

Software Setup Window

(This is for the 6.0 and above versions of the Software. Earlier versions not have the Excel and Print and Comport options)

Language: You may select a user interface language.

Test Time: You may select a longer test time for the Stress Test (5 Minutes). The longer test period will give a more accurate result. Note that the arterial test time cannot be changed and is always 1 minute.

Reference Type: The machine has two calibrations, one for Eastern populations and one for Western Populations.

User Name: You May Enter Your Practice Name

Telephone: You May Enter Your Phone Number

Printing Options: If you have version 6.0 of the Software or higher, you will have the option to print or save an image of the report.

In these versions of the Software, if you go to the Set Up Menu, you will see at the bottom of the page 2 check boxes. One is called print and the other is called Image. This allows you to set the default for when you print a report.
Print Check Box– Sends a printed report to the Windows default printer.
Image Check Box – Will save an image of the report onto the hard drive. The folder where the image is saved (with the name of the patient and the date) is on the C drive> MEDICORE>MAX PULSE_GENERAL> IMAGE. When using this it would be ideal to save a shortcut to that folder on the desktop.
Those same two options appear each time you print. You can check them or uncheck them depending on if you want to print, save an image, or both.
Printer: Select the default printer for printing reports.
Excel: Export Function to Export Test Information.

Not Shown: Turn Pre-Prepared Comments On of Off

The printed reports can show a pre-printed comments section with generic comments. These can be turned on or off at the set up screen.

Press F8 to remove the comments. You will see this message:

Press  F9 to turn them on. You will see this message.